Torque Converter
Professional torque converter solutions for automotive performance optimization. Find optimal torque converter specifications for enhanced acceleration and fuel efficiency.
Torque Converter
Select the units, enter a value, and click Convert to get the result instantly.
Select the unit to convert from
Select the unit to convert to
Enter the value to convert
How to Convert Torque?
To convert torque between different units, use the appropriate conversion factors. For example, to convert Newton meters to Foot-pounds, multiply by 0.737562. To convert Pound-force feet to Newton meters, multiply by 1.35582. This converter handles all common torque units including SI units (N·m, kN·m) and imperial units (ft·lb, in·lb, etc.).
Torque Conversion Principles
1. Newton Meter (N·m)
The Newton meter is the SI unit of torque, representing the rotational force of one newton applied at a perpendicular distance of one meter from the axis of rotation. It is the fundamental unit for measuring torque in the International System of Units.
2. SI Multiples
Torque units use standard SI prefixes: Kilonewton meter (kN·m) = 1,000 N·m. These are commonly used in industrial machinery, automotive engineering, and heavy equipment specifications.
3. SI Submultiples
For small torque levels: Millinewton meter (mN·m) = 0.001 N·m, Micronewton meter (µN·m) = 0.000001 N·m. These are used in precision instruments, microelectronics, and medical devices.
4. Foot-Pound (ft·lb) and Pound-Force Foot (lbf·ft)
The foot-pound is a traditional imperial unit of torque commonly used in the United States for automotive and mechanical applications. 1 ft·lb = 1.35582 N·m. Pound-force foot (lbf·ft) is technically the same as foot-pound force.
5. Inch-Pound (in·lb)
Inch-pound is used for smaller torque specifications, such as fasteners, electronics, and precision equipment. 1 in·lb = 0.112985 N·m, or 1/12 of a foot-pound.
6. Kilogram Force Meter (kgf·m)
Kilogram-force meter is a metric unit still used in some countries and industries. 1 kgf·m = 9.80665 N·m. It represents the torque from a one-kilogram force applied at a one-meter radius.
7. Dyne Units
Dyne meter (dyn·m) and dyne centimeter (dyn·cm) are CGS (centimeter-gram-second) system units used in physics and scientific calculations. 1 dyn·m = 0.00001 N·m, and 1 dyn·cm = 0.0000001 N·m.
8. Conversion Formulas
- N·m to ft·lb: N·m × 0.737562 = ft·lb
- ft·lb to N·m: ft·lb × 1.35582 = N·m
- N·m to in·lb: N·m × 8.85075 = in·lb
- in·lb to N·m: in·lb × 0.112985 = N·m
- N·m to kgf·m: N·m × 0.101972 = kgf·m
- kgf·m to N·m: kgf·m × 9.80665 = N·m
- ft·lb to in·lb: ft·lb × 12 = in·lb
- kN·m to N·m: kN·m × 1,000 = N·m
9. Common Applications
- Automotive lug nuts: 80-100 ft·lb (108-136 N·m)
- Bicycle pedals: 30-35 ft·lb (41-47 N·m)
- Oil drain plugs: 15-25 ft·lb (20-34 N·m)
- Laptop screws: 2-5 in·lb (0.23-0.56 N·m)
- Engine cylinder heads: 50-90 ft·lb (68-122 N·m)
- Electric motors: 10-1,000 N·m
- Industrial machinery: 100-5,000 N·m
- Wind turbines: 10-50 kN·m
10. Torque vs. Moment
Torque and moment of force are physically equivalent but used in different contexts. Torque typically refers to rotational force that causes rotation, while moment refers to the tendency of a force to rotate an object about a point or axis. Both are measured in the same units.
Common Torque Units
Newton Meter (N·m)
The SI unit of torque, representing one newton of force applied at a one-meter perpendicular distance from the axis of rotation. Used as the standard unit worldwide for scientific and engineering calculations.
Kilonewton Meter (kN·m)
SI multiple used for high torque applications such as large industrial machinery, ship engines, and power transmission systems.
Foot-Pound (ft·lb) and Pound-Force Foot (lbf·ft)
Traditional imperial units commonly used in the United States for automotive torque specifications, fastener tightening, and mechanical engineering.
Inch-Pound (in·lb) and Pound-Force Inch (lbf·in)
Smaller imperial units used for precision applications, electronics assembly, and small fasteners.
Kilogram Force Meter (kgf·m)
Metric gravitational unit still used in some countries for automotive and mechanical specifications. Being phased out in favor of Newton meters.
Gram Force Centimeter (gf·cm)
Very small torque unit used in watchmaking, precision instruments, and micro-mechanics.
Dyne Meter (dyn·m) and Dyne Centimeter (dyn·cm)
CGS system units used primarily in physics, scientific research, and theoretical calculations.
Millinewton Meter (mN·m) and Micronewton Meter (µN·m)
SI submultiples used for very small torque measurements in microelectronics, precision sensors, and medical devices.
Ounce Force Units
Ounce-force foot (ozf·ft) and ounce-force inch (ozf·in) are imperial units used for very light torque applications in small mechanisms and delicate assemblies.
